| Deel Nee | Fabrikant | Toepassing |
|---|
| MAX6315US44D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.39V. Reset timeout period(min) 20ms. |
| MAX6346UR40-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 4.000V. Order increment 10k |
| MAX6316LUK28CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MX7582BQ | MaximIC | Calibrated 4-channel 12-bit ADC |
| MAX6321HPUK28AW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| DS1859E-020 | MaximIC | Dual, temperature-controlled resistors with internally calibrated monitors, 20KOhm |
| MAX675CTV | MaximIC | +5V precision voltage reference. Temp. coefficient 12ppm/degC, Initial error 7mV. |
| MAX516BEWG | MaximIC | Quad comparator with programmable threshold. Error (LSB) +-2 |
| MAX384EWN | MaximIC | Low-voltage, dual 4-channel multiplexer with latchable inputs. |
| MAX6321HPUK33BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6310UK37D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.608(min),3.793(max). Nominal timeout period 140ms. |
| MAX6321HPUK29BX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX369CJN | MaximIC | Fault-protected analog multiplexer with latch. 4 channel differential (2 of 8). |
| MX7548JCWP | MaximIC | CMOS 8-bit microprocessor compatible 12-bit DAC. Linearity +-1 LSB. |
| MAX4075AEEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 1.25V/V, noninverting gain 2.25V/V, -3dB BW 70kHZ. |
| MAX291EWE | MaximIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX4178MJA | MaximIC | 330MHz -3dB bandwidth, gain of +1, closed-loop buffer. |
| MAX6320PUK39AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX252BCHL | MaximIC | Complete, +5V-powered, isolated, dual RS-232 transceiver module. |
| MAX999EUK-T | MaximIC | Single, ultra-high-speed, +3V or +5V, Beyond-the-Rails comparator. |
| MAX6320PUK35BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX355EWE | MaximIC | Fault-protected analog multiplexer |
| MX574AJCWI | MaximIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1. TEMPCO(ppm/C) 50. |
| MAX5130BEEE | MaximIC | +5V, 13-bit, serial voltage-output DAC. Built-in 10ppm/C(max) precision bandgap reference +2.5V. INL (LSB) +-1. Full-scale output range +4.0955V. |
| MAX6321HPUK31AY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX113CNG | MaximIC | 3 V, 400 ksps, 4-channel, 8-bit ADC |
| MAX208EEAG | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| DG305AK | MaximIC | CMOS dual and quad analog switch. |
| MAX4612CPD | MaximIC | Low-voltage, quad, SPST, CMOS analog switches (two NC and two NO switches). |
| MX7248JN | MaximIC | Complete, 12-bit voltage-output DAC. |
