MH89792-3 spec: 5V; E1 transceiver. For primary rate ISDN network interface and multiplexer equipment

MH89792-3 Soortgelijke

MH8910-1AC
- Digital subscriber line interface circuits for ISDN NT1 and NT2 DSL interface, digital PABX line cards and telephone sets, digital multiplexers and concentrators and for pair gain systems.
MH8910-1AP
- Digital subscriber line interface circuits for ISDN NT1 and NT2 DSL interface, digital PABX line cards and telephone sets, digital multiplexers and concentrators and for pair gain systems.
MH89101
- "Passive line termination circuit. For pair gain system, ISDN NT1 and NT2 interfaces, digital multiplexers and concentrators, ISDN U-interface terminals"
MH89101
- Passive line termination circuit for pair gain systems, ISDN NT1 and NT2 interfaces, digital multiplexers and concentrators, ISDN U-interface terminals.
MH89625C
- 0.3-7.0V; OPS/DID PCM SLIC. For off premise digital PBX line cards, DID (direct inward dial) line cards, PABX, key systems, central office equipment
MH89625C-6
- 0.3-7.0V; OPS/DID PCM SLIC. For off premise digital PBX line cards, DID (direct inward dial) line cards, PABX, key systems, central office equipment
MH89626C-02
- 0.3-7.0V; OPS/DID PCM SLIC. For off premise digital PBX line cards, DID (direct inward dial) line cards, PABX, key systems, central office equipment
MH89626C-04
- 0.3-7.0V; OPS/DID PCM SLIC. For off premise digital PBX line cards, DID (direct inward dial) line cards, PABX, key systems, central office equipment

MH89792-3 Datasheet en spec

Fabrikant : Mitel

Verpakking : SIL

Pins : 20

Temperatuur : Min 0 °C | Max 70 °C

Grootte : 73 KB

Toepassing : 5V; E1 transceiver. For primary rate ISDN network interface and multiplexer equipment